STYLE: EXP-TB
The EXP-TB is designed for steam turbines. The design coalesces and expels steam before it reaches the bearing housing.
STYLE: EXP-PB
EXP-PB includes all the benefits of a standard EXP with an adaptation to mount within the existing LER/LOR ring grooves of split pillow blocks.
STYLE: EXP-GB
EXP-GB is designed for applications where a positive seal is required because of flooded conditions. A positive seal is created within the EXP with no parts to wear on your shaft. Common applications are...
STYLE: EXP-FL
EXP-FL includes all the benefits of a standard EXP with the adaptation for flange mounted applications where pressing the stator is not recommended or possible.
STYLE: EXP
EXP is a true non-contact bearing isolator that utilizes a dual expeller to create centrifugal force and drive away contamination. Statically, EXP utilizes dual vertical oriented chambers to form the most...
STYLE: Heliflow
Heliflow is a unique type of shell and tube heat exchanger. The tubes in the Heliflow are arranged in parallel, starting with an inlet manifold on one end, and terminating at an outlet manifold on the...
STYLE: SDF
SDF saves resources and extends seal life. The dual flow flow meter is the ideal partners for applications requiring uninterrupted seal water flow for cooling and lubrication. The model is compatible with...
STYLE: SSF
SSF sealing liquid monitor is designed for applications where uninterrupted seal water flow is required. Adequate seal water flow for cooling and lubrication results in water savings, energy savings,...
STYLE: A1C
Designed for light to medium duty services in ANSI plans 7352 and 7353 for the chemical, food, pharmaceutical, pulp and paper, water and waste treatment, and general industry
STYLE: SAS-S
Abrasive separators provide a simple yet extremely effective method of keeping dirt and other abrasives from the sealing faces. A method that can increase seal or pacing life many times over to greatly...
STYLE: SAS-N
Abrasive separators provide a simple yet extremely effective method of keeping dirt and other abrasives from the sealing faces. A method that can increase seal or pacing life many times over to greatly...
STYLE: SAS-P
With two shaft-supporting bushings and a lantern ring, the SAS-P is a noncontact tandem seal that uses air to seal and water to flush and clean the stuffing box/seal chamber. The seal is impervious to...
STYLE: SAS
SAS is an engineered pneumatic sealing system designed to seal the shafts of equipment where typical contact seals such as packing and/or mechanical face seals prove to be too costly to operate and maintain
STYLE: TJS
TJS is a single rotary unit designed to mount internally on large rotating equipment like pressure screens where component seal design is required.
STYLE: SRS
SRS is a single internal component mounted rotary seal designed for general service applications.
STYLE: SMD
SMD is a heavy-duty multiple-component seal that mounts externally and can be designed to handle up to 1/4″ shaft deflection and 1/8″ end-play making it ideal for use on agitators, mixers, reactors,...
STYLE: OSS
OSS is an externally mounted single spring component seal capable of handling up to 1/4″ shaft deflection and 1/8″ end-play. This makes it ideal for positive displacement pumps, augers, mixers, agitators...
STYLE: OMS
OMS is an externally mounted single component seal capable of handling up to 1/4″ shaft deflection. This makes it ideal for use on augers, belt driven pumps, mixers, agitators and slow moving rotating...
STYLE: LTB
Low Temperature Bellow is a single non-pusher, rotating welded metal bellows design. The rugged design is great for handling the extremes of low temperatures. The edge welded bellows design has the...
STYLE: VSR
VSR is a single, external cartridge-mounted rotary seal design for installations where shaft deflection exceeds the limits allowed by off-the-shelf cartridge seals.
STYLE: UMC
UMC is a stationary design multiple spring double seal used where leakage of hazardous or costly products cannot be tolerated and where positive lubrication without product dilution is required.
STYLE: SRC
SRC is a single internal cartridge mounted rotary seal designed for general service applications.
STYLE: RBD
RBD is a stationary design multiple spring double seal used where leakage of hazardous or costly products cannot be tolerated and where positive lubrication without product dilution is required.
STYLE: LTC
Low Temperature Cartridge is a single non-pusher, rotating welded metal cartridge design. The rugged design is great for handling the extremes of high temperatures.
The edge welded cartridge design has the...
STYLE: HOS
HOS is a balanced single spring rotary seal capable of handling conditions much higher than conventional single spring designs.
STYLE: HTC
HTC is a cartridge metal bellows seal using grafoil secondary seals to handle elevated temperatures without any adverse effects.
STYLE: ESD
ESD is a back-to-back multiple seal designed for application where positive lubrication is required from an external flush without dilution of the product.
Since all metal parts are isolated and the pumped...
STYLE: DTP
The Dual Rotary Pumper (DRP) is a cartridge-mounted mechanical seal that facilitates impeller adjustments, reduces power consumption, and maintains interfacial lubrication. It fits standard ANSI sizes, has...
STYLE: DTP
DTP is a multiple, cartridge-mounted mechanical seal. Rugged and dependable, the DTP is ideal for closed-loop convection cooling systems. With the DTP being reciprocally balanced, it offers a higher...
STYLE: DRC
DRC is a multiple cartridge mounted rotary seal designed to be easily adapted to difficult-to-fit equipment.
