STYLE: ML5707
ML5707 PTFE fibers are treated with a PTFE dispersion which fills and seals all voids in the packing body. After braiding, a PTFE coating is applied. This packing will not wick making it an excellent...
Braided Acrylic Fiber Braided Throughout a Lubrication/ Graphite Mix
STYLE: ML6001
ML6001 features a blend of synthetic fibers treated with specially formulated lubricants with a saxoline base.
The lubrication formulation makes the extra difference. The ductile nature of the lubricant prevents wicking and provides superior sealability.
The packing is constructed with a Multi-Lok braid and each strand is individually coated with graphite. The packing receives a final secondary surface coating of graphite.
Product Specifications
Operating Capabilities
- Temperatures: 450°F/232°C
- Speeds: 1885 fpm
- pH: 4 to 10
Design Features
Two track braiding style which allows for tight bends while packing knife gate valves.
You May Also Like
Related Products
STYLE: ML5740HC
Finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration. It is effective in all equipment, including pumps, hydra-pulpers, and valves.
STYLE: ML5701U
Multi-Lok braided graphite packing made from graphite fibers with a minimum of 99% carbon and a maximum of 1% ash. This dispersion coating of graphite does not contain any hydrocarbon, PTFE, or any...
STYLE: ML8911W
Multi-Lok braided graphite foil packing. No added lubricants or binders to cook out or become brittle. The foil is made from a natural lubricant (graphite). Each strand of yarn prior to braiding is...
STYLE: ML8201W
ML8201W flexible graphite packing with Inconel wire inserted.
STYLE: ML8201
Pure homogenous graphite bonded to a fiberglass carrier for strength and thermal stability. It has no added lubricants or binders to cook out or become brittle.
STYLE: SB2028
Braided carbon yarn with Inconel wire inserted over a pliable homogeneous core of material. The braid is made from a high temperature, Inconel wire inserted yarn. The finished packing is treated with a...
STYLE: SB5715
Use this specially treated PTFE packing where economy, high wet strength, low abrasion and low friction are required. Recommended for shafts and sleeves and is an appropriate choice for stern tubes on...
STYLE: ML5715
ML5715 is a general purpose packing with a reinforced special blend of fibers. Thoroughly impregnated with PTFE suspension.
STYLE: ML8622
ML8622 fugitive emissions packing is certified API 622 emission compliant. ML8622 is recommended for high-temperature valves and pressure vessels. It performs well in high-temperature, high-pressure...
STYLE: 2004
This packing is manufactured from soft ribbons of special alloy lead foil. It has a twisted and crimped construction, with each layer of the foil thoroughly lubricated and graphited.
STYLE: ML8560
Proprietary carbon fiber is braided to operate in extreme conditions. Because of its high thermal conductivity and lubricity, ML8560 packing can operate without flush water in some applications.
STYLE: ML5700
The highest quality chemically resistant fibers are twisted together and braided. This packing has an extremely low coefficient of friction. The lightweight yarn provides more feet per pound than PTFE...
STYLE: ML8203
Flexible graphite jacket encasing Multi-Lok carbon fiber. ML8203 is recommended for critical valves; rising stem applications; compliance valves in volatile organic and inorganic chemical service and...
STYLE: ML8201Z
ML8201Z is a Multi lock braided flexible graphite packing. No added lubricants or binders to cook out or become brittle. Contains zinc dust as a corrosion inhibitor.
STYLE: ML8201P
ML8201P is a Multi lock braided flexible graphite packing. No added lubricants or binders to cook out or become brittle. Contains phosphate as a corrosion inhibitor.
STYLE: ML5702
ML5702 is treated throughout with graphite. It is recommended for general service on rotary and reciprocating shaft and as end rings on high-temperature valves.
